This classic Nissan was brought to TW for general maintenance and a few performance upgrades.  The stock 300 h.p. twin turbo needed the timing belt, water pump, rear main and a new clutch installed.  After an overall inspection it was noted that the brake shoes were worn completely causing deep grooves in the rotor.  New brakes and rotors were added to the list.   How about unleashing the power of the boost?  New down flow pipes were installed between the turbo and the exhaust system.  This allowed for more air flow due to the restrictive OEM pipes.  A new boost controller located in the dash, was also installed.  This allowed by-passing the waste gate in order to increase the boost.  With the newly increase in boost,  new 640cc fuel injectors were needed along with a Haltech ECU fuel management system.  After off this work is completed, the car will get a dyno and custom tune.... and of course, you can't forget the 500 mile clutch break-in before hand!

First photo
Second photo

First photo

Looks like the timing belt and water pump repair has already started.

First photo
Second photo

The rear main was replaced along with the water pump and timing belt. 

First photo
Second photo

Here are the new high flow exhaust down pipes.... what a big improvement.

First photo
Second photo

Here are the deep groves in the front brake rotors plus a shot of the transmission.

First photo
Second photo

New rotors and brakes!

First photo
Second photo

Here are the old parts that were replaced... what a big project!

First photo
Second photo

The new injectors are installed and the engine is back together.  Next is the 500 mile break in and then its dyno time!