This classic corvette was upgraded with an LS2 that was pulled from a GTO. The customer did all the work and just needed the crew at TW to rewire the wiring harness. The wiring harness was pulled and sent out for rebuild. Soon it will be ready for tuning on the dyno.
Before the car got on the dyno, it was noticed there was issue with the engine. With further investigation, it was found that piston 1 and 3 had damaged bearings. The engine was pulled and sent out for machine work.
Here is the bad bearings.
The engine has been removed, disassembled and sent out to Mulder's Machine Shop for repair.
The tranny needs removed and rebuilt... with a freshly rebuilt engine and tranny this car should be good for a long time!