Building our new frame table

Frame repair on the newly built frame table.

Custom frame rebuild and repair.

Custom intercooler design and installation.

Aluminum welding and fabrication

Custom exhaust design and installation. Also custom mounted gauges in the dash so it looks OEM.

Low Fuel Pressure: Aftermarket jet fuel pump issues So we purchased this fuel hat for a clients GTR from a vendor whom I won't name. Here is a bit of the back story, Nissans have a 'jet pump' system to draw fuel from one side of the tank to the other. The vendor has cnc'd a nice clean version of it. The hat gives the ability to run 2 in tank pumps, and if you believe their propaganda the system with the right pumps it will support over 1000hp. However truth be told the jet pump which is in the return line will not flow enough, on this application this lack of flow results in a minimum base fuel pressure of 80psi. After being promised a new upgraded jet pump, then being told that it all wouldn't flow enough anyway, we decided to deal with it ourselves. Pretty simple fix really, just add a bypass fitting in the line going to the jet pump. Frustration is high when working with vendors who fail to deliver what they promise.

Custom Stainless Exhaust work:  A customer needed a little assistance on his exhaust system for his at home car project.  His original exhaust pipe has a mesh joint, but kept on falling apart over time.  He tried to have a local shop bend a 90 degree bend into a replacement pipe, but the over stretched metal kept on collapsing.  The crew at TW ordered a 90 degree pipe and welded it together in ordered to fit his project.